Daikin Altherma EPGA011-016DV, Руководство по установке для специалистов, Страница: 8 / 104

3 About the box
Installer reference guide
8
EPGA11~ EABH/9W
Daikin Altherma – Low temperature split
4P556069-1 – 2018.10
3.2.3 To remove the accessories from the
outdoor unit
1 Open the outdoor unit.
2 Remove the accessories.
1×
2×
2×
1× 1×
ENERG
IJA Y
IA IE
ENERG
IJA Y
IA IE
1×
RXXX
1× 1×
a d e
b c
a Outdoor unit installation manual
b Fluorinated greenhouse gases label
c Multilingual fluorinated greenhouse gases label
d Shut-off valve (with integrated filter)
e Energy label
3.2.4 To remove the transportation stay
NOTICE
If the unit is operated with the transportation stay attached,
abnormal vibration or noise may be generated.
The compressor transportation stay must be removed. It is installed
under the compressor leg in order to protect the unit during
transport. Proceed as shown in the figure and procedure below.
1 Remove the nut (a) of the compressor mounting bolt.
2 Remove and discard the transportation stay (b).
3 Remove and discard the washer (c).
4 Re-install the nut (a) of the compressor mounting bolt and
tighten to 10.1 N•m of torque.
(10.1 N·m)
2
a
b
c
4
3
1
3.3 Indoor unit
3.3.1 To unpack the indoor unit
1 2
3.3.2 To remove the accessories from the
indoor unit
Some accessories are located inside the unit. To open the unit, see
"7.2.3 To open the indoor unit" on page 28 .
1× 1× 1× 1×
a b c d
2× 4× 1×
f e g
1×
h
a General safety precautions
b Addendum book for optional equipment