![background image](http://html1.mh-extra.com/html/daikin/altherma-3-h-ht-etsxb16e7/altherma-3-h-ht-etsxb16e7_installation-manual_3458088012.webp)
5 Piping installation
Installation manual
12
ETSH/X(B)16P30+50E
Daikin Altherma 3 H HT ECH
₂
O
4P679468-1B – 2022.09
1
2
6
Cut open the top cover.
If the space heating/cooling or the domestic hot water pipes are
directed upwards, the top cover must be cut along the perforation
with a suitable tool.
7
Support the water piping.
For rearward facing connections: Support hydraulic lines suitably
according to the spatial conditions. This is valid for all water pipes.
d
c
b
a
a
Space heating/cooling water OUT (screw connection, 1")
b
Space heating/cooling water IN (screw connection, 1")
c
Domestic hot water OUT (screw connection, 1")
d
Domestic cold water IN (cold water supply)(screw
connection, 1")
NOTICE
▪ It is recommended to install shut-off valves on the
space heating/cooling water in and out connections, as
well as on the domestic cold water in and domestic hot
water out connections. These shut-off valves are field
supplied.
▪
However, make sure there is no valve between the
pressure relief valve (field supply) and the DHW
tank.
NOTICE
Install air purge valves at all local high points.
NOTICE
A pressure relief valve (field supply) with an opening
pressure of maximum 10 bar (=1 MPa) must be installed
on the domestic cold water inlet connection in accordance
with the applicable legislation.
Содержание Altherma 3 H HT ETSXB16E7
Страница 45: ......
Страница 46: ......
Страница 47: ......
Страница 48: ...4P679468 1B 2022 09 Copyright 2022 Daikin 4P679468 1 B 0000000B Verantwortung f r Energie und Umwelt...