Daikin Altherma 3 GEO EGSAH06UD Series, Руководство по установке

Страница: 7 / 52

4 Unit installation
Installation manual
7
EGSAH/X06+10UD
Daikin Altherma 3 GEO
4P598591-1C – 2023.02
3 If necessary, remove the front panel. This is, for example,
necessary when you want to remove the hydro module from the
unit. See
"4.2.2 To remove the hydro module from the
unit" [
4
7] for more information.
2×
T25
4 In case you want to install the option kit EKGSPOWCAB
(= power cable for split power supply), also remove the left side
panel. Also see
"6.4 To connect the main power supply" [
4
16].
3×
T25
5 Open the installer switch box as follows:
2×
T25
6 In case you have to install additional options that require access
to the main switch box, remove the main switch box cover as
follows:
4×
4.2.2 To remove the hydro module from the unit
Removing the hydro module is only required for easier transportation
of the unit or for servicing. The removal of the module will
significantly reduce the weight of the unit. This makes the unit easier
to handle and carry.
1 Open the following (see "4.2.1 To open the indoor unit" [
4
6]):
1 User interface panel
2
1
2 Front panel
2 Remove the insulation from the shut-off valves by cutting the
cable ties.