Functions of the Device
Entering the main menu
After switching the vehicle engine on, you can turn on the device by pressing the
symbol. If you want to turn off the
device, you must press and hold the same symbol for 3 seconds.
Once the device is on, it resumes with the media it left off or the main menu. In order to return to the main menu, you must
short-press the same symbol again. The Main Menu is composed of pages. In order to scroll among the pages, please
touch the
points either by hand or with the touch screen stylus. You can activate the section which you want to
enter/operate by simply touching its symbol on the main menu.
In order to enter the radio screen, please tap the radio symbol in the main menu.
To seek/store the stations (channels):
1.
Automatic seeking/storing
(1)
When you press the
button on the radio screen, stations are sought/stored automatically.
(2)
Pressing the
button again while seeking stops the seeking process.
2.
Seeking and storing stations manually
(1) In order to seek stations manually, touch the frequency scale on the screen with your finder or with the screen stylus.
If the device finds a station during seeking, the seeking operation stops and the radio channel starts to play.
(2) You can search for stations by directly touching the right/left seeking buttons [
].
(3) Once a station has been found (e.g. 87.50MHz), you can long-touch one of the stored channels on the radio screen
to store the playing station in the pressed zone.
(4) You can store 18 stations in FM band (FM1/FM2/FM3, 6 stations for each) and 12 stations in AM band (AM1/AM2, 6 stations for each.
(5) The device stops automatically once it has completed scanning the whole frequency band.
Station selection/band passing/LOC-DX selection
(1)
To choose the station you want to listen to among the stored stations, touch that frequency directly on the radio screen.
(2)
You can switch to FM1, FM2, FM3, AMI and AM2 stations by pressing the
button on the radio screen.
(3)
You can make the LOC/DX selection by pressing the
button on the radio screen. If you select LOC (local), stations transmitting strong/clear signals will be found only. If you select
DX, weak stations will be found, too.
RDS function
RDS offers a range of information such as information about traffic, channel name etc. to the user. It enables you to
switch to the station which has a strong signal level and is broadcasting the same channel automatically.
RDS data include the following:
Pl
—program name/TA—traffic announcement/PS—Channel name/PTY—Program type
AF
—alternative frequency/TP—traffic program /EON—enhanced other networks
You will enter the RDS screen once you touch the RDS icon on the top-right side of the radio screen;
RDS screen
TA (Traffic announcement)ON: If you activate (on position) the TA, the radio will automatically start to search for
stations that broadcast information about traffic.
Once a station is found, "TP" message will be displayed on the screen. Only when a traffic announcement is made this
function will be enabled and inform the user.
After that, the radio will resume where it left off. If there is an emergency announcement, the warning message
"ALARM" will be displayed on the screen.
OFF: Press the TA button again to deactivate the TA function. When a traffic announcement is made when in other sections such as CD/DVD, the radio will announce it and the device will
resume operating.
AF: Touch the button to switch on/off AF. When AF is activated, the radio will automatically switch to the alternative frequency when the radio signal starts to weaken.
EON ON: Another alternative frequency list is received when the EON function is enabled. OFF: EON function gets deactivated.
REG ON: Activates the REG function, only the local RDS stations are received. OFF: Deac tivates the REG function.
