Q-222-032
5
Combination mounting dimension example (unit：mm)
■ Screw mounting ■ IEC/DIN rail mounting
■ How to install this product in a IEC / DIN rail.
The claw of the upside of the slot for rail mounting in the bottom of this product is put in a rail.
This product is fixable by pushing in the direction of an arrow below.
35mm width DIN rail
Slider
■ How to remove this product from the IEC / DIN rail.
Please insert a flathead screwdriver in the hole where a slider is square. Next, a slider is lowered in the
direction of an arrow. This product can be removed from the rail by pulling it up in the direction of the
arrow. However, the case may be damaged if this product is pulled up without lowering a slider completely.
Flat-head screwdriver
Slider
② ①
①：40mm width transducer.
②：56mm width transducer.
Please use rail of IEC, DIN technical standard 35mm width rail
(strong type).
《Recommendation product》 Fuji Electric Co., Ltd.
TH35-15AL
