Daihen OTC WB-P400, Руководство пользователя

Страница: 63 / 158

6-1
Chapter 6 W
elding Condition
Chapter 6 Welding Condition
This chapter explains the functions on the operation panel as well as how to set the welding conditions.
6.1 List of Welding Conditions
This section explains the parameters/functions settable in the welding power source.
6.1.1 Parameter (Welding parameter)
6.1.2 Function
Parameter
Set Range
Initial
Value
Descriptions
Three phase Single phase
Pre-flow time 0 to 10 sec 0.1 sec
Set the gas discharge time before welding
starts.
Initialized condition/
Main condition/
Crater condition
Current
20 to 400 A
10 to 400 A
(for TIG
welding)
20 to 300 A
(for DC STICK
welding)
20 to 250 A
(for DC
welding)
20 to 200 A
(for pulse
welding)
10 to 250 A
(for DC TIG
welding)
20 to 200 A
(for pulse TIG
welding)
150 A
Initial Condition: set the current and voltage
value soon after the welding.
Welding condition: set the current and voltage
value during the welding.
Crater condition: set the current and voltage
value at the end of welding.
Voltage
(INDIVIDUAL)
10.0 to 45.0 V 10.0 to 30.0 V 23.5 V
Voltage
(SYNERGY)
-100 to 100 0
Post-flow time 0 to 10 sec 0.4 sec
Set the gas discharge time after the welding
ends.
Arc spot time 0.1 to 10 sec 3 sec Set the welding time at arc spot.
Arc characteristics -10 to 10 0 Set the arc to the condition from soft to hard.
Welding condition memory No. 1 to 100 1
Register the welding conditions (storable up to
100).
Wave frequency 0.5 to 32.0 Hz 3.0 Hz Set the wave frequency at wave pulse.
Function Initial value Setting parameter
CRATER-FILL CRATER-FILL-OFF CRATER-FILL-OFF / CRATER-FILL-ON (no pulse) / CRATER-FILL-ON (with pulse) / ARC SPOT
GAS MAG (20
％
CO
2
) MAG (20
％
CO
2
) / MIG (2
％
O
2
) / MIG (100
％
Ar)
WIRE
MATERIALS
MILD STEEL
MILD STEEL / MILD STEEL CORED / STAINLESS STEEL / STAINLESS FERRITE /
STAINLESS CORED / Brazing Cu Si / Brazing Cu Al / SOFT ALUMINUM / HARD ALUMINUM
/ INCONEL
WELDING
METHOD
DC PULSE DC PULSE / DC / DC WAVE PULSE / DC TIG / DC STICK
WIRE DIA.
[in.(mm)]
.045 (1.2) .030 / .035 / .040 / .045 / .052 / 1/16 (0.8/0.9/1.0/1.2/1.4/1.6)
INITIAL
CONDITION
OFF ON/OFF
VOLT. ADJUST INDIV. SYNERG. / INDIV.