Daihatsu EDM18ZII, Инструкция по эксплуатации

Страница: 5 / 16

len
and'e
TVp
DM18ZJ30Z)
MICOM
DOOR
tV
os. (.1.,
=b~",
op
'l« 0 Ib~n 'Y
Colas
Be.
'Ich (551
IV m
Jiwit
h(
II
0
n .wilc;h(
External switches
Half-open selector switch
~O)
Installed for double-sliding or long-stroke doors. Turning this
switch ON allows half-open door operation.
Panic switch (PS) Upon receipt of a signal from an emergency sensor (optional), this
switch turns on to open or close the door (when lOOV AC is supplied)
with an alarm. With an optional battery pack, this emergency
operation is available even if a power failure occurs.
Emergency stop
switch (ES) Self-holding switch. Turning this switch on stops an opening or
closing door. The door is released by turning this switch off. Push-
button type.
Half-open switch
(HS) Turning this switch on opens the door constantly half-way. For
large-sized, long-stroke doors.
Ratchet switch
(RS)
~
Controlled by pulse signals. Opens with an ON pulse, and then closes
with the next ON pulse. Available in kick, foot, and push-button
types.
Safety beam switch
(SB)
Light controlled sensor switch. When an object blocks the beam
running in front of the door, this switch turns on to stop the
closing door
"and
opens it again. This switch does not operate when
the door is closed.
Sensor switch
(SS)
When turned on, the door opens. When turned off, the door closes.
Available
in heat, radar, or mat types.
3. Drive unit
To prevent slippage, the drive belt has teeth which engage with the reduction gear output
pulley. The connector between the drive belt and the door is made of galvanized iron
plate.