Daihan Scientific Ba Series, Руководство пользователя

Страница: 9 / 43

DAIHAN-Sci.com or ALL for LAB.com Shopping Mall
9/20
A heater is built in. Touching the heater in operation may cause a burn. To open
or close a moisture analyzer, use the grip of the heater cover.
A part of the moisture analyzer gets very hot and may cause a fire. Therefore, DO
NOT put nothing over the heater cover.
DO NOT use the product near a heater or an air conditioner.
DO NOT use in a place with constant sunlight and a place exposed to rain.
Otherwise, the product may get overheat or an electric defect.
(DO NOT use it outdoor.)
DO NOT put the product close to flammable spray lacquer and paint, volatile
and flammable chemicals. A spark of a switch may cause ignition.
DO NOT let an unpermitted person to disassemble or transform the product.
Otherwise, a severe electric trouble may occur, and no warranty service is
provided by DAIHAN Scientific Co., Ltd.
Make sure to use a grounded socket.
DO NOT ground to a gas pipe, a plastic water pipe, or a phone line.
Otherwise, an electric shock, a fire, a failure, or an explosion may occur.
Regularly check that the power plug has dust. Connect the plug completely. If the
plug has dust or is not connected completely, an electric shock or a fire may
occur.
If the product is not used long, unplug it for safety. Otherwise, dust may cause
ignition and heating.
To separate the power plug, make sure to hold the plug. If you hold the power
cord only to separate the plug, some internal wires of the cord may have
disconnection which causes ignition.
If abnormal noise or abnormal operation symptom is found in use, immediately
power off the product, unplug, and contact the product supplier or the Technical
Support Team of DAIHAN Scientific Co., Ltd.
To move the product, unplug the product and be careful not to get the power
cord and the product damaged. The damage to the cord may cause an electric
shock or ignition.