Daihan Scientific Ba Series, Руководство пользователя

Страница: 18 / 43

DAIHAN-Sci.com or ALL for LAB.com Shopping Mall
18/20
4. Product Maintenance
4.1 Maintenance
Multi-use Digital Balance
was developed in consideration of various conditions that can occur
in operation. Nevertheless, to use long the system with stable performance, follow each of the
following:
1. Make sure to the rated voltage of AC 230V, 50/60Hz.
2. Operate the product indoor at less than 85% relative humidity and keep an indoor temperature
at 5°C-40°C.
3. If the product is not used long, unplug, dry, and pack it.
4. If the product has a failure in use and its part needs to be replaced, use a genuine part offered by
our company.
5. If a failure is caused by the excess use of the product, maintenance service is not provided.
6. Make sure to use a defined power type.
7. DO NOT touch the power plug and electric devices with your wet hands.
8. To lengthen the lifespan of the halogen lamp, remove finger prints or other impurities.
9. Be careful not to get liquid flow in the device while it is being cleaned.
10. Immediately wipe the spilled liquid or powder in use and make the product clean always.
11. Carefully brush out a sample with large particles or powder or remove it with a small vacuum
cleaner. At this time, make sure to power the product off.
12. If the equipment which has not been used long at least 24 hours since the initial AC power on is
used again, warm up it before use.
4