Dahua VTO2202F-P, Быстрая установка, Страница: 4 / 12

4 Tel: +44 (0)1457 874 999 | Fax: +44 (0)1457 829 201 | Email: sales@cop-eu.com | Online: www.cop-eu.com
1. Check the box next to the VTO to be initialised. 2. Click the initialise button to start the initialise process.
3. Enter the new password to be used for the VTO
and an email address for password recovery. Set
P/N to P and click next to continue.
4. Check or Uncheck Online update options. A direct
internet connection is required for these features.
5. After a few seconds the tool should show that the
VTO was successfully initialised. Click Finish to end
the process.
6. The VTO will now show in the Confi g Tool in an
initialised state. It is now possible to program the
VTO IP address and other settings. You must ensure
the password is modifi ed to the initialised password
of the VTO within the search setting, located at the
top of the confi g tool.