5
Adding Additional VTH Units
When additional VTH units are to be added to the system, usually it is required that all VTH units are called by the VTO.
To enable this feature and configure the additional VTH units;
Login to the VTO web browser and go to
System Config > LAN Config
and tick the
Group Call
option.
Click
OK
then select
Logout > Reboot
On the additional VTH unit, first configure the network address within the same range as both the VTO and existing VTH units.
Go to
Project Settings > Product Info
and select
Master
, this will change the VTH to Extension mode. Input the room number of the
master unit followed by
-1
, as an example if the room number is
1
enter
1-1
or
1-2, 1-3
etc for further additional units.
In the
Master IP
field enter the IP address of the main VTH unit.
Select
OK
to save the setting, the configuration is now complete.
Tel: +44 (0)1457 874 999 | Fax: +44 (0)1457 829 201 | Email: [email protected] | Online: www.cop-eu.com
