Dahua VTH5221 series Скачать руководство пользователя страница 42

Страница: 42 / 105

Interface Operation 36

Interface Operation

Main Interface

6.1

There are six items at the main interface, namely, call, info, monitor, SOS, setting and arm/disarm, as

shown in Figure 6-1. For description of every item, please refer to Table 6-1.

Name

Description

Room No.

Number of the room where VTH is located.

Call

Call a user.

Manage the contacts.

View and manage the call records.

Info

View, delete and clear notices issued by Property Management Center.

View, delete and clear security alarm info.
When VTH doesn’t have a SD card or VTO enables video-audio
message uploading function,

“Guest Message” tab will be displayed.

View, delete and clear messages of VTO.

When VTH owns a SD card,

“Video Pic” tab will be displayed. View,

delete and clear videos and pictures.

Status Bar

: Wired network connection icon, meaning that the

device isn’t

connected with network.

: Wired network connection icon, meaning that the device has

connected with network in a wired way.

: Wi-Fi network connection icon, meaning that the device has

connected with network in a wireless way.

: Main VTO connection icon, meaning that the device failed to

connect main VTO; without this icon, the device has connected with

main VTO successfully.

: SD card icon, meaning that SD card has been inserted into the

device; without this icon, the SD card has not been inserted or the
device doesn’t support SD card.

: DND (Do Not Disturb) icon, meaning that the device has enabled

DND function. It is not enabled by default.

Time

Display date, day of the week and time.

Arm/disarm

Display the last unread alarm info.

: press this icon to enter arm mode selection.

Содержание VTH5221 series










































































































Результаты поиска

Содержание VTH5221 series

Отзывы:

Похожие инструкции для VTH5221 series

Бренды по названию

Популярные бренды

Dahua VTH5221 series, Руководство пользователя

Результаты поиска

Содержание VTH5221 series

Отзывы:

Похожие инструкции для VTH5221 series

Бренды по названию

Популярные бренды