Dahua Video ConferencingEndpoint Quick Start Guide
18
Figure 5-2
2. Select member, press
button to select the needed meeting members.
3.
Select“OK”, press
button and save config.
The system returns to
“New” interface, and it will display the name of the first contact and the
number of invited members in the button of
“Invite Contacts”.
Step 4
Select
“Create” and press
button.
The system will enter meeting directly.
Note
Select “Advanced” to set meeting stream parameters and meeting parameters.
5.1.2 Join Meeting
Some meeting is in process, and you failed to join in time, then you can join directly via entering
“Meeting ID”.
Note
For non-member, it only supports to join the meeting which has not been locked.
Step 1
Select
“Meeting> Join” and the system will display the interface of “Join”, which is shown in
Figure 5-3.