Dahua Video ConferencingEndpoint Quick Start Guide
15
4.6.2 Service Config
Note
Please select
“Hardware Endpoint” in the “MCU” device adding before configuring SIP.
The SIP config parameter of local device has to be in accordance with the actual setting of
MCU, otherwise SIP config will fail.
Step 1
Select
“Setting > Service”, the system will display the interface which is show in Figure 4-7.
Figure 4-7
Step 2
Select
“Private Config” and press
button. The system will display the interface which is
shown in Figure 4-8.
Figure 4-8
Step 3
It is to set parameters, please refer to Table 4-3 for more details.