14
Step 3
Press
to select the language as needed.
You can select the language from English, German, Spanish, Italian, Czechish, and French
Step 4
Press
to save the configuration.
3.3 Video and Snapshot
You can manually record videos and capture images when the Camera is installed with an SD card.
3.3.1 Recording Videos
On the viewing interface, press and hold
for 3 seconds to start recording a video. The OSD
flashes red on the screen and the recording time is display.
Press and hold
again for 3 seconds to stop the recording. When the recording stops, the
recording time will display normally.
3.3.2 Capturing Images
On the viewing page, press
to capture images.
The screen will display an icon when the capturing succeeds.
3.3.3 Exporting File
Exports the recorded and captured files.
Step 1
Connect the Camera to the computer through USB data cable.
The driver will automatically be installed for first-time connection.
●
Connect the cables before starting the Camera. Do not hot swap the USB port of the
Camera.
●
Select
UVC
on the
USB Mode
configuration screen after connecting the Camera to the
computer.
Step 2
On the computer desktop, double-click
My Computer
, and then open the Camera disk at a
mobile storage device.
Step 3
Select the files to export and copy them to the computer.
The specific computer client is required for playing the exported files.
Step 4
Disconnect the USB data cable with the computer.
After connecting the Camera to the computer, images can be displayed on the Camera,
but the functions of recording and capturing will not be available.
3.4 Charging
The start bar will display battery information after the Camera starts. When the battery is low, charge
the Camera timely to make sure the normal function.
●
When charging the Camera, the temperature is required at 0 °C to 45 °C (32 °F to 113 °F).
