113
Video temper
Figure 4-60
Select the
Enable
check box.
Step 2
Configure video temper parameters. See Table 4-31.
Step 3
Table 4-32
Parameters description
Parameter
Description
Period
Define a period during which the alarm settings are active.
1.
Click
Setting
, and the period setting interface is displayed.
2.
Configure period.
Method 1: Hold down and drag the left mouse button to select
working period you need.
Method 2: Select
Setting > Event > Video Detection
and click
Setting
on the right side of
Period
.
An interface
is displayed. In this interface,
there are seven
Setting
s altogether each of which corresponds to a
day in a week. Select a
Setting
you want and there are six periods
(period1-period6) below for you to pick up.
3.
Click
Save
of working period.
Record
Enable this function and alarm recording will be triggered when there is an
alarm.
To view and set storage path of recorded videos, see "4.1.2.5 Configuring
Storage Path".
The following two conditions must be satisfied before alarm recording
function works:
You have enabled motion detection recording. See "4.7.1.1 Configuring
Video Recording" for detailed operations.
You have enabled auto recording. See "4.7.3 Configuring Record
Control Parameters" for detailed operations.
