Dahua PFH610V-IR, Руководство пользователя

Страница: 18 / 21

13
Figure 3-3
Figure 3-4
During wiring, it is suggested that wiring harness should divide into signal harness and power
harness, go out of two holes respectively and connect waterproof joints. If all wires goes out of one
hole and connect waterproof joint, it is suggested that the other hole should be covered with
waterproof plug, in order to prevent water leakage.
3.3
Bracket Model
 The bracket is not included in basic configuration of the housing. Please buy it if it is needed.
 Anti-corrosion protective housing shall be matched with specific anti-corrosion bracket.
Please refer to Table 3-1 for bracket models corresponding to all installation and hanging modes.