2
②
Put the HDD to the HDD bracket in the chassis and then line up the four screws to the four holes in the
HDD. Use the screwdriver to fix the screws firmly to secure HDD on the HDD bracket
③
Connect to the HDD data cable to the main board and the HDD port respectively. Loosen the power
cable of the chassis and connect another end of the power cable to the HDD port.
④
After connect the cable, put the front cover back to the device and then fix screws of the rear panel.
1.5
Front Panel
For detailed operation instruction, please refer to the User
’s Manual included in the resources CD.
The front panel is shown as in Figure 1-1.
Figure 1-1
