Dahua NVR2 Series NVR2208 Скачать руководство пользователя

Страница: 2 / 181

User Manual of NVR2XXX(-P4-P8) Series NVR

Regulatory information
FCC information

FCC compliance

This equipment has been tested and found to comply with the limits for a digital device,

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

interference when the equipment is operated in a commercial environment. This equipment generates, uses, and

can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may

cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to

cause harmful interference in which case the user will be required to correct the interference at his own expense.

FCC conditions

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference received, including interference that may cause undesired operation.

EU Conformity Statement

This product and - if applicable - the supplied accessories too are marked with "CE" and comply therefore with the

applicable harmonized European standards listed under the Low Voltage Directive 2006/95/EC, the EMC

Directive 2004/108/EC.

2002/96/EC (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal

waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase of

equivalent new equipment, or dispose of it at designated collection points. For more information see:

www.recyclethis.info.

2006/66/EC (battery directive): This product contains a battery that cannot be disposed of as unsorted municipal

waste in the European Union. See the product documentation for specific battery information. The battery is

marked with this symbol, which may include lettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg). For

proper recycling, return the battery to your supplier or to a designated collection point. For more information see:

www.recyclethis.info

Содержание NVR2 Series NVR2208






















































































































































































Результаты поиска

Содержание NVR2 Series NVR2208

Отзывы:

Похожие инструкции для NVR2 Series NVR2208

Бренды по названию

Популярные бренды

Dahua NVR2 Series NVR2208, Руководство пользователя

Результаты поиска

Содержание NVR2 Series NVR2208

Отзывы:

Похожие инструкции для NVR2 Series NVR2208

Бренды по названию

Популярные бренды