91
for you to use the special keyboard to control the device. PTZ matrix is to connect to the
peripheral matrix control.
z
Baud rate: You can select proper baud rate.
z
Data bit: You can select proper data bit. The value ranges from 5 to 8.
z
Stop bit: There are three values: 1/1.5/2.
z
Parity: there are five choices: none/odd/even/space mark.
System default setup is:
z
Function:
Console
z
Baud
rate:115200
z
Data
bit:8
z
Stop
bit:1
z
Parity:
None
After completing all the setups please click save button, system goes back to the previous menu.
Figure 5-8
5.3.5 Network
Here is for you to input network information.
z
IP address: Here you can input IP address.
z
DHCP: It is to auto search IP. When enable DHCP function, you can not modify IP/Subnet
mask /Gateway. These values are from DHCP function. If you have not enabled DHCP
function, IP/Subnet mask/Gateway display as zero. You need to disable DHCP function to
view current IP information. Besides, when PPPoE is operating, you can not modify
IP/Subnet mask /Gateway.
z
TCP port: Default value is 37777.
z
UDP port: Default value is 37778.
z
HTTP port: Default value is 80.
z
RTSP port: Default value is 554.
z
Max connection: system support maximal 20 users. 0 means there is no connection limit.
z
Preferred DNS server: DNS server IP address.
z
Alternate DNS server: DNS server alternate address.
z
Transfer mode: Here you can select the priority between fluency/video qualities.
Содержание N56 Series
Страница 1: ...N56 Series Standalone DVR User s Manual Version 1 2 2 ...
Страница 84: ...74 Figure 4 20 Figure 4 21 Figure 4 22 ...
Страница 133: ...123 Figure 6 11 ...
