Environmental Precautions
•
Transport, use, and store the unit within the specified temperature and humidity range.
•
Do not place the unit in a wet, dusty, extremely hot or an extremely cold environment; and avoid
environments with strong electromagnetic radiation or unstable lighting.
•
Never push objects of any kind into this unit through openings as they may touch dangerous
voltage points or cause a short circuit that may result in fire or electrical shock. Take care to not
spill any liquid on the unit.
•
Do not use units intended for indoor applications near water, in damp or wet environments, or in
any area classified as a wet location. Do not expose an indoor unit to rain or moisture to reduce
the risk of fire or electric shock.
•
Do not block or cover any openings in the unit enclosure. These openings are provided for
ventilation to prevent overheating and to ensure reliable operation. Ensure the unit is placed in
an area with adequate ventilation.
•
Do not place the unit near a heat source such as heaters, stoves, radiators or other equipment
that produces heat.
•
Use the following guidelines if placing the unit in a rack-mount:
•
The ambient temperature of a rack-mount environment may exceed the recommended
operating temperature of the unit. Take care to read the ambient temperature before
installation.
•
A rack-mount environment may restrict the movement of air. Ensure the unit receives the
proper amount of air flow required for safe operation or install the unit elsewhere.
•
A rack mount is capable of supporting a maximum weight. Ensure the rack mount can support
the additional weight of this unit.
•
A rack mount environment requires proper and adequate circuitry. Ensure the circuits to the
rack are capable of handling the electrical requirements of all units in the rack to protect
against circuit overloads.
•
Pack the unit with standard factory packaging or material of the same quality when transporting
the unit.
•
Take care to avoid heavy stress, violent vibration, or water spills to the unit during transportation,
storage, and installation.
Operation and Daily Maintenance
•
Do not touch the heat dissipation component of the unit. This part of the unit is hot and may
cause a burn.
•
Do not open or dismantle the device; there are no components that a user can fix or replace.
Opening the unit may cause water leakage or expose components to direct light. Contact the
manufacturer or a qualified service representative to service the camera or to replace a
component, including the desiccant.
•
Dahua recommends the use of a thunder-proof device in concert with the unit.
•
Use a dry soft cloth to clean the unit’s housing. If the unit is particularly dusty, use water to dilute
a mild detergent, apply the diluted detergent to a soft cloth, then gently clean the device. Finally,
use a dry cloth to wipe the unit dry. Do not use a volatile solvent like alcohol, benzene, or thinner;
or use a strong detergent with abrasives, which may damage the surface coating or reduce the
working performance of the unit.
Lithium Battery Disclaimer
•
Improper use of the lithium battery shipped in this unit may result in fire, explosion, damage to
the unit, and personal injury.
•
If the need to replace the battery arises, ensure that the replacement battery is the same model
as the original battery.
WARNING:
•
Risk of explosion if a different battery type is used a replacement.
•
Dispose of used batteries according to the instructions of the battery manufacturer
and local codes.
Available from A1 Security Cameras
www.a1securitycameras.com email: [email protected]
