WEB Client 32
Click
, enter the interface of Config (LPR).
Config (LPR)
The steps of config (LPR) are shown as follows.
Set focus and zoom mode, which is used to recognize vehicle. Refer to Table 5-6for
more details.
Table 5-6 Focus parameter description
Parameter
Note
Auto Focus
Auto adjust camera lens and make the scenario clearly focused.
Manual
Focus
Manually set focus parameter and make the camera focus on the vehicle.
Zoom:
Step length: There are totally 3 levels to be selected.
Zoom in, zoom out: Click
and add a step length, click
and
reduce a step length; Or directly drag adjustment bar and set zoom.
Focus:
Step length: There are totally 3 levels to be selected.
Focal length: Click
and add a speed, click
and reduce a
speed; or it can directly drag adjustment bar to set near and far focal
length.
Restore All
All is restored to initialization settings.
Refresh
Check the latest status.
Select the config line type which needs to be drawn. Refer to Table 5-7 for more details.
The configured area line and detection line in the
Guide
are displayed in the video
interface.
Table 5-7 Config line parameters description
Parameter
Note
Recognition
Click it and draw the area range which needs to be detected.
The recognition area line is displayed as red box.
