Quick Start Guide
3
than 12 V, please use an additional electric relay.
Figure 1-3 Alarm output
Step 3
Log in to web page, and configure alarm input and alarm output in alarm settings.
●
The alarm input on the web page is corresponding to the alarm input end of the I/O
port. There will be high level and low level alarm signal generated by the alarm input
device when alarm occurs. Set the input mode to "NO" (default) if the alarm input signal
is logic "0" and to "NC" if the alarm input signal is logic "1".
●
The alarm output on the web page is corresponding to the alarm output end of the
device, which is also the alarm output end of the I/O port.
