24
z
Use the screwdriver to loosen the 3G card protection cap screw in the side panel, and then
remove the 3G card protection cap from the camera.
z
Install the 3G card to the camera according to the proper installation position.
z
Put the 3G card protection cap back.
z
Use the screwdriver to fix the 3G card protection cap screw firmly to secure the 3G card
protection cap.
Figure 3-7
Figure 3-8
3.3.2 Remove
Please follow the steps listed below to remove 3G card. The interface is shown as Figure 3-9.
z
Use the screwdriver to loosen the screw of 3G card protection cap in the rear panel.
Remove the cap from the camera.
z
Follow the 3G card direction to remove the 3G card.
z
Insert the 3G card protection cap.
z
Use the screwdriver to fix the screw to secure the protection cap.
Figure 3-9
eLineTechnology.com
