Dahua IPC-HDBW5502N, Быстрый старт

Страница: 22 / 31

18
a) For the IR series product, you can skip current step and go the step b) directly. For the non-IR
series product, push the port slightly to remove the decoration enclosure from the black plastic
enclosure. See Figure 2-13.
Figure 2-13
b) Lens pan rotation angle setup. Please refer to Figure 2-14 to unfasten the lock screw A and adjust
the pan monitor angle to the proper position. Then fix the lock screw A. The pan angle ranges from
0°~+350°.
c). Lens tilt rotation angle. Please refer to Figure 2-14 to unfasten the lock screw B and lock screw C
and adjust the tilt monitor angle to the proper position. Then fix the lock screw B and lock screw C. The
tilt angle ranges from -20°~+70°.
d). Image pan rotation angle setup. Please refer to Figure 2-14 to turn lock screw D to adjust the video
pan angle. Then fix the lock screw B and C. The video pan angle ranges from 0°~+350°.
e) For the motorized zoom series product, please skip current step. Please refer to chapter 2.2.2 for
the lens zoom and focus operation of the manual focus series product.
f) For the IR series product, please skip current step and complete the angle setup directly. For the
non-IR series product, please put back the black plastic decoration enclosure to complete the angle
setup.
Important
Please note Figure 2-14 is based on the IR motorized zoom camera. For the IR manual zoom
camera and non-IR series product, the lock screw position and the lens angle adjustment are
the same.