Dahua EZ-IP TURRET, Быстрый старт

Страница: 22 / 80

Ovner’s manual
22
EN
Thank you for purchasing our network cameras.
This user’s manual is designed to be a reference tool for using your product.
Please read the following safeguards and warnings carefully before you use this
series product.
Please keep this user’s manual well for future reference.
Important Safeguards and Warnings
Electrical safety
• All installation and operation should conform to your local electrical safety
codes.
• The power source shall conform to the requirement of the Safety Extra
Low Voltage (SELV) standard, and supply power with rated voltage which
conforms to Limited power Source requirement according IEC60950-1.
Please note that the power supply requirement is subject to the device label.
• Make sure the power supply is correct before operating the device.
• Prevent the power cable from being trampled or pressed, especially the plug,
power socket and the junction extruded from the device.
• We assume no liability or responsibility for all the fires or electrical shock
caused by improper handling or installation.
Environment
• Do not aim the device at strong light to focus, such as lamp light and sun
light, otherwise it might cause over brightness or light marks, which are not
the device malfunction, and affect the longevity of Complementary Metal-
Oxide Semiconductor (CMOS).
• Do not place the device in a damp or dusty environment, extremely hot
or cold temperatures, or the locations with strong electromagnetic radiation
or unstable lighting.
• Keep sound ventilation to avoid heat accumulation.
• Transport, use and store the device within the range of allowed humidity and
temperature.
• Heavy stress, violent vibration or water splash are not allowed during
transportation, storage and installation.
• Pack the device with standard factory packaging or the equivalent material
when transporting the device.
Operation and Daily Maintenance
• Do not dismantle the device because there is no component that can be fixed
by users themselves. Otherwise, it might cause water leakage or bad image
due to unprofessional dismantling.
• If there’s humidity or fog present on the internal components of the camera,