ESS Series
User’s Manual
54
Figure 3-25
3.4.4.1
Remove Pool
The remove operation consists of the following two situations. You can refer to Figure 3-25.
Click remove button if there is no share directory in the storage pool.
You can see a dialogue box pops up if there is a share directory. You need to delete share
directory first and then remove the storage pool.
3.4.4.2
Add Pool
In Figure 3-25, click add button, you can see the following interface. See Figure 3-26.
Here you can select RAID device (RAID0, RAID1, RAID5, RAID6, and JBOD), single disk (such
as disk1) to create a storage pool. Click save button after creating storage pool device.
You can see the disk array enclosure from the location dropdown list if you have connected to
the disk array enclosure. Otherwise, you can not see this item.
