ESS Series
User’s Manual
34
After you logged in, you can see system information interface. Or you can click system and then
select system information item to go to current interface.
For dual control series product, you can see the statuses of dual controllers.
Here you can see the following information:
Host name
System time
Start time
Device type
Software version
Hardware version
Power status
iSCSI status.
3.2.2 Parameters
After you logged in as the system administrator, click parameters button, you can see the
following interface. See Figure 3-2.
Device name: Set system name.
Device position: Input device position information for you reference.
Date: Set system date. Check the enable button to set.
Time: Set system time. Check the enable button to set.
Start Time Synchronize: Enable time synchronization function.
Server address: Set time server address.
Time interval: The interval for the time server synchronization operation.
Update now: Click it, system begins time synchronization immediately. You can see the
corresponding dialogue box if the synchronization operation failed.
Important
If it is your first time to go to the system, please set system date and time.
The time server IP and the device IP shall be in the same section if you want to use time
synchronization function.
