Dahua EEC300D8-N1, Быстрый старт, Страница: 3 / 24

II
Important Safeguards and Warnings
This chapter describes the contents covering proper handling of the Data Collection Station
(hereafter refer to as “the Station”), hazard prevention, and prevention of property damage. Read
these contents carefully before using the Station, comply with them when using, and keep the
manual well for future reference.
Operation Requirement
●
Do not place or install the Station in a place exposed to sunlight or near the heat source.
●
Keep the Station away from dampness, dust or soot.
●
Keep the Station installed horizontally on the stable place to prevent it from falling.
●
Do not drop or splash liquid onto the Station, and make sure that there is no object filled with
liquid on the Station to prevent liquid from flowing into the Station.
●
Install the Station in a well-ventilated place, and do not block the ventilation of the Scanner.
●
Operate the Station within the rated range of power input and output.
●
Do not disassemble the Station.
●
Transport, use and store the Station under the allowed humidity and temperature conditions.
Electrical Safety
●
Always replace with the same type of batteries.
●
Use the recommended power cables in the region and conform to the rated power specification.
●
Use the power adapter provided with the Station; otherwise, it might result in people injury and
device damage.
●
The power source shall conform to the requirement of the Safety Extra Low Voltage (SELV)
standard, and supply power with rated voltage which conforms to Limited Power Source
requirement according to IEC60950-1. Please note that the power supply requirement is subject
to the device label.
●
Connect the Station (I-type structure) to the power socket with protective earthing.
●
The appliance coupler is a disconnection device. When using the coupler, keep the angle for easy
operation.