Installation and Configuration
7
SIP server (2)
Figure 2-8
This VTO works as SIP server.
Select
SIP Server Enable
, and click
OK
to save the configuration. The VTO will
restart automatically.
Another VTO or platform works as SIP server.
Set parameters according to Table 2-1 and click
OK
. The VTO will restart
automatically.
Table 2-1 SIP server parameter
Parameter
Description
IP Address
IP address of SIP server.
Port
It is 5060 by default when another VTO works as SIP
server.
It is 5080 by default when the platform works as SIP server.
Username/Password
Use default value.
SIP Domain
It shall be VDP when another VTO works as SIP server.
It can be null or keep default value when the platform
works as SIP server.
Login
Username/
Password
Username and password to log in to the SIP server.
VTO settings have been completed if the platform or another VTO works as SIP
server.
If this VTO works as SIP server, VTO No. Management and Room No.
Management appears in the left parameter tab. Add VTO and VTH according to
Step 9 and Step 10.
(Optional) Log in to web interface again, and then select
Household Setting > VTO No.
Step 10
Management
.
The
VTO No. Management
interface is displayed. See Figure 2-9.
