Installation and Configuration
8
VTO No. management
Figure 2-9
Click
Add
, set outdoor station parameters according to Table 2-2 and click
OK
. Repeat
Step 11
this step to add other outdoor stations in the group.
Table 2-2 VTO No. management description
Parameter
Description
VTO No.
VTO number.
Register Password
Signaling interactive use in SIP system. Use default
value.
Build No.
Number of the building where VTO is located.
Unit No.
Number of the unit where VTO is located.
IP Address
IP address of VTO.
Username/Password
Username and password to log in to the web interface of
this VTO.
(Optional) Select
Household Setting > Room No. Management
.
Step 12
Room No. Management
interface is displayed. See Figure 2-10.
When there are master VTH and extension, both shall be added.
Room No. management
Figure 2-10
Click
Add
, set VTH parameters according to Table 2-3 and tap
OK
. Repeat these steps
Step 13
to add other VTH in the group.
Table 2-3 Room No. management
Parameter
Description
Family Name
Set VTH username and nickname, in order to distinguish.
First Name
Nick Name
Room No.
Set VTH room number.
