User’s Manual
14
Fix part 1 to the casing, and use M10 nut and spring washer to secure part 1.
Step 1
Align holes of part 3 with those of part 5, and thread four M10×60 hex head bolts and
Step 2
plain washers through the holes of parts 3 and 5.
Fix parts 3 and 5 to part 2, and secure the bolts with M10 nuts and spring washers.
Step 3
Thread part 6 (two JFM-1214 flange bearings) through two sides of part 8.
Step 4
Thread part 8 through part 1, and fix the two parts with M10 nut and spring washer.
Step 5
Secure the bolts mentioned in step 2 with M10 nuts and spring washers. See a
Step 6
successful installation example in the following figure.
Successful installation example
Figure 3-11
