Dahua DH-TPC-PT8320C, Быстрый старт

Страница: 5 / 18

iv

Note : It is to alert you there is an optional risk of damage or property loss!
Warning
1. Be sure to use all the accessories (such as power adapter) recommended by manufacturer.
2. Do not connect several thermal tribrid domes to one power adapter. It may result in overheat
or fire if it exceeds the rated load.
3. Avoid aiming the lens at the strong radiation source directly (such as sun, laser, molten steel
etc); in case it may cause unrecoverable damage to the thermal imaging detector. What
’s
worse, it may cause severe damage to the detector.
4. Avoid oil stain and kinds of chemicals tarnishing and damaging the lens surface.
5. Store the device in a cool and dry place where there is ventilation but no intense
electromagnetic field.
6. Violent vibration or crash is not allowed during transportation and application.
7. Before you connect the cable, install or uninstall, or begin the daily maintenance work,
please turn off the power and unplug the power cable.
8. Please make sure the produce is secure firmly on the wall or the ceiling.
9. Please turn off the power and unplug the power cable, If there is any smoke, disgusting
smell, or noise. Please contact your local retailer or customer service centre for help.
10. All the examination and repair work should be done by the qualified service engineers. We
are not liable for any problems caused by unauthorized modifications or attempted repair.
Laser Radiation
Please pay attention to the following items if the camera adopts laser device.

Laser can cause damage to human eyes, so it is prohibited to emit laser to the people within
50m away from the ranging device.

Laser may cause perpetual damage to the device, so it is prohibited to make laser ranging to
the targets within 50m away from the ranging device.

Laser radiation can cause perpetual damage to human skin and eyes, besides it can ignite
flammables, so it should be avoided exposing any goods (scattering terminal or absorber
excluded) to the laser beam, do not place some volatile flammables (such as alcohol) in the
working area of laser radiation product, which is to avoid laser radiation or fire caused by
spark which is generated by high voltage discharge.

It should remove all the objects which can generate specular reflection in the working area of
the laser radiation product, because even if it is the reflected or scattered light of the laser, it
is still very intensive, which can cause damage to human eyes. Please take necessary
measures to control the reflecting and scattering range of the laser if it has to use such kind
of goods.

If it needs to dismantle or move the ranging device, please wait for 5 minutes after the laser
ranging device stops working, which is to make sure the internal accumulated charge has
totally released in order to avoid electric shock of accumulated charge.

It is prohibited to touch circuit of the ranging device in the working state, especially for the
laser power supply with high voltage of over 1000V.

It is prohibited to plug in or out cable when the power is on.