Dahua DH-TPC-PT8320C, Быстрый старт

Страница: 13 / 18

7
The
“Front” logo is printed on the side of the PTZ (shown in Figure 3-1
①
), pay attention not to
install in a wrong direction, make sure the arrow direction is in accordance with the indication
direction.
Step 5
Connect the PTZ aviation plug to the corresponding location of the aviation port of the housing
and tighten the aviation plug firmly.
Step 6
Carry the device onto the installation platform designated by users; use the screws in the PTZ
accessories bag to fix the PTZ on the installation platform. Pay attention to observe the
gradienter on the PTZ pedestal when fixing the device, the bubble should stay in the middle of
the gradienter.
Step 7
It can properly extend the PTZ cable according to the actual construction, the power adapter is
included by default, and please consult relevant people of the company before installation if it is
to use other power adapters. The extended cable should be prepared by users themselves,
please refer to
“3.1.2 Cable Preparation” for the requirements of extended cables.
Note:
It is recommended that the grounding holes of the device should be connected to ground, which
is to improve the device stability.
Step 8
Install waterproof connector for network port (optional), which is shown in Figure 3-3.
Note:
Please implement this step if the device is equipped with network port waterproof connector and
it is used outdoors.
Figure 3-3
1. Keep the convex groove outward and install the rubber ring into the network port, keep the
smaller hole of the rubber ring outward and install the fixing rubber ring into the main body of
the waterproof connector.
2. Pull the network cable without crystal head through main body of waterproof connector, fixing
rubber ring and waterproof locking cover, make the crystal head of network cable, and then
insert it into the network cable.
3. Put the main body of waterproof connector on the network port and rotate it clockwise to lock
the network port and waterproof connector firmly.
4. Put the waterproof locking cover on the main body of waterproof connector and rotate it
clockwise to lock the waterproof connector and waterproof locking cover firmly.