14
Figure 3-2
Step 5 Set the mode as
Static,
and input the planned
Start IP
,
Subnet Mask
and
Gateway.
Note
Set the mode as
DHCP
when there is DHCP server in the network, the device
will automatically acquire IP address from the DHCP server.
Step 6 Click
OK
to finish modification.
3.2
Login WEB Interface
Note
Different devices might have different WEB interfaces, the figures in this document are
just for reference, please refer to the document
WEB Operation Manual
and the actual
interface for more details.
To login WEB interface, do the following:
Step 1 Open IE browser and input the modified camera IP address in the address bar,
and then press
Enter
key. The system displays the login interface, see Figure
3-3.
Figure 3-3
Step 2 Input username and password.
