Important Safeguards and Warnings V
Important Safeguards and Warnings
The Manual helps you to use our product properly. Read the Manual carefully before installing
and using the product, and we highly recommend you to keep it well for future reference.
Avoid heavy stress, violent vibration, and water splash during transportation, storage, and
installation.
Complete package is necessary during the transportation. We will assume no
responsibility for any damage or problem caused by the incomplete package during the
transportation.
Avoid the product falling down or heavy vibration.
Buckle the safety hook before installing the product if it is included.
Keep the product away from devices that might produce strong electromagnetism radiant,
including wireless power, TV transmitter, transformer, and loudspeaker.
Keep the product away from smoke, vapor, dust, and heat. Do not install the speed dome
near the heating furnace, spotlight, and other heat source.
Do not dissemble the product. A failure to follow this instruction might result in personal
injury or device damage. Contact your local retailer or customer service center for internal
setup or maintenance requirement.
Make sure there is no metal or inflammable in the product. A failure to follow this instruction
might result in fire, short-circuit, or other damage.
Turn off the power and disconnect the power cord immediately if there is water or liquid
falling into the product. And contact your local retailer or customer service center.
Avoid the sea water or rain eroding the camera.
Avoid the lens aiming at intense light source, including sunlight and incandescent light.
Clean the enclosure with the soft cloth or soft cloth with proper cleaning liquid, and then dry
it with soft cloth. Do not use gasoline, dope thinner, or other chemicals to clean the
enclosure. A failure to follow this instruction might result in enclosure transfiguration or
paint flake.
Read all the Manuals included before you use chemical cloth.
Avoid long time touch between the plastic or rubber material and the enclosure. A failure to
follow this instruction might result in paint flake.
It is highly recommended to use the product with a lightning-proof device for better
lightning-proof effect.
Qualified Engineer Needed
The installation engineer or maintenance engineer shall have corresponding CCTV system
installation certificate or maintenance qualification certificate, including qualification certificate
for work at height.
The installation engineer or maintenance engineer shall have the basic knowledge and
installation technique for CCTV system.
