Speed Dome Installation 3
Reset button
Figure 2-3
2.3.1 Reset Button
Reset button is for resetting the network system.
Open the cover, press and hold the reset button for over 10 seconds, and then all the settings
will be restored back to factory default.
2.3.2 Micro SD Card
Micro SD card is for data storage.
To install the Micro SD card, do the following:
Pay attention to the pulling and inserting direction of Micro SD card slot.
Make sure the Micro SD card is in the status of non-read/write when removing the Micro
SD card. Otherwise it may cause data loss and SD card damage.
Press down the Micro SD card slot slightly, and then open it towards the OPEN
Step 1
direction.
The card slot will become loose.
Insert the Micro SD card. Be aware that the card metal surface is corresponding to the
Step 2
golden finger of the card slot.
Press the slot slightly and pull it according to the direction of CLOSE.
Step 3
