15
Level
client and WDS repeater, it shows
overall signal level of client, as
well as uplink and downlink signal
level of client.
Quality
TX/RX Rate
As a parameter for client, WDS
client and WDS repeater, it shows
momentary
rate
of
transmitting/receiving
data
of
present equipment.
Time
It displays time. When NTP client
function is enabled, NTP server is set
correctly and the equipment is online,
the time item will be automatically
updated to calibration time on NTP
server. If it cannot go online, it has a
default value.
Table 4-1 Parameters on Status Display Page
Real-time Monitoring
Throughput rate:
also known as throughput capacity, it refers to data size passing every section within
unit time. Throughput rate on status display page refers to data size transmitted on the network within
unit time. This is a main index to measure network performance. With this index, the user can monitor
data transmission speed of the equipment.
Figure 4-2 Throughput Rate
Routes table:
it stores the path pointing to network of DH-PFM88X equipment.
Figure 4-3 Routes Table
Bridge table:
corresponding relation of MAC address and aging time of equipment whose
communication has gone through DH-PFM88X in the past certain period, obtained by DH-PFM88X.
