DH Network Camera
Product Construction Instruction Manual (Passenger Flow Solution)
21
The system uses
People Counting
to count the passenger flow into and out of the region. When
the counted passenger flow exceeds the preset alarm-triggered quantity, an alarm is triggered.
Select
Setup > Event > People Counting
.
The
People Counting
interface is displayed. See Figure 5 .
Figure 3-3
People counting (2)
Set the
Rule
to
People Counting
Select
Enable
to turn on region people counting.
Click
Draw Area
to draw the detected are in the surveillance image.
Click
Draw Rule
to set up the counting rule for entering and exiting the detection area.
Set up the
people counting parameter
. See Table 3-2.
Table 3-2
Description of people counting
Parameters
Description
Sensitivity
Set up the sensitivity of triggered alarm. The higher the sensitivity, the
easier the alarm is triggered.
Maximum
detection height
Set up the maximum detection height that triggers alarm when an
object or person stands up.
Minimum
detection height
Set up the minimum detection height that triggers alarm when an
object or person stands up.
OSD
Select
OSD
to display the count of people entering and exiting in the
surveillance image.
Click
Clear
to clear the count.
People counting
alarm
Allows for setting up the number of people entering, exiting, and
lingering. Hitting the set limit triggers alarm.
