27
Parameters
Description
Operation Key
Configure operation Key. Members in the same aggregation group need to
configure the same operation Key, ranging from 1 through 65535.
Operation Key is the basis of negotiation, and only ports with the same
operation key can negotiate to form a convergence link.
Time Out
Long Timeout is selected by default, and can be selected as Short Timeout.
Activity
Activity is
Passive
by default and can be select as
Active
.
●
When Activity is selected as
Active
, the Switch will actively initiate
convergence negotiation. When Activity is selected as
Passive
, the
Switch will passively accept convergence negotiation initiated by other
devices.
●
When two devices are interconnected, at least one or both ends need to
be set as
Active
, the mode can be successfully negotiated.
Procedure
Step 1
Select
Device Management
>
Link Aggregation
on the
System Info
page.
Step 2
Select
Link Group
.
Step 3
Select member port.
Step 4
Select
State
as
Enable
, select
Type
as
LACP
, and then select
Activity
as
Active
.
Step 5
Click
Submit
.
Step 6
Select
Link Aggregation Mode
as
MAC Src&Dst
.
Step 7
Click
Save
.
After the aggregation is successful,
√
will be displayed under the corresponding port.
Figure 4-12 LACP aggregation
5.4 Security
5.4.1 MAC Address List
When the Switch forwards the message, it searches for the MAC address list according to the
message destination MAC address. If the MAC address list includes an item matching the message
destination MAC address, it uses the output port to forward the message. If the MAC address list has
