background image

 

IV 

Operation Requirements 

 

  Do not disassemble the device without professional instruction. 

  Operate the device within the rated range of power input and output. 

  Make sure that the power supply is correct before use. 

  Make sure the device is powered off before disassembling wires to avoid personal injury. 

  Do not unplug the power cord on the side of the device while the adapter is powered on. 

 

  Use the device under allowed humidity and temperature conditions. 

  Do not drop or splash liquid onto the device, and make sure that there is no object filled with 

liquid on the device to prevent liquid from flowing into it. 

  Operating temperature: –10 °C (+14 °F) to +55 °C (+131 °F). 

  This is a class A product. In a domestic environment this may cause radio interference in which 

case you may be required to take adequate measures. 

  Do not block the ventilator of the device with objects, such as a newspaper, table cloth or curtain. 

  Do not place an open flame on the device, such as a lit candle. 

Maintenance Requirements 

 

  Power off the device before maintenance. 

  Mark key components on the maintenance circuit diagram with warning signs. 

Содержание D-PFS3110-8ET1GT1GF-96


















Отзывы: