Dahua D-IPC-HDBW3541R-ZAS-S2, Быстрый старт

Страница: 11 / 20

Quick Start Guide
5
Select the devices that need initialization, and then click Initialize . Step 6
The password setting interface is displayed. See Figure 2-2.
Password setting Figure 2-2
Set and confirm the password of the devices, then enter a valid email address, and then click Step 7
Next
.
The final setting interface is displayed.
Password can be modified or reset in System Settings .
Select the options according to your needs, and then click
OK
. Step 8
The
Initialization
interface is displayed after initialization is completed. Click the success
icon ( ) or the failure icon ( ) for the details.
Click
Finish
. Step 9
The device status in the Modify IP interface (Figure 2-1) turns to Initialized .
Modifying Device IP Address 2.2

You can modify IP address of one or multiple devices at one time. This section is based on
modifying IP addresses in batches.

Modifying IP addresses in batches is available only when the corresponding devices have the
same login password.
Do Step 1 to Step 4 in "2.1 Initializing Device" to search devices in your network segment. Step 1
After clicking
Search setting
, enter the username and password, and make sure that they
are the same as what you set during initialization; otherwise there will be wrong password
notice.
Select the devices whose IP addresses need to be modified, and then click
Modify IP
. Step 2