Dahua D-IPC-HDBW3541R-ZAS-S2, Быстрый старт

Страница: 10 / 20

Quick Start Guide
4
2
Network Configuration
Device initialization and IP address setting can be finished with the "ConfigTool" or on web interface.
For more information, see the
Web Operation Manual .

Device initialization is available on select models, and it is required at first use or after the device
being reset.

Device initialization is available only when the IP addresses of the device (192.168.1.108 by
default) and the PC stay in the same network segment.

Plan useable network segment properly to connect the device to the network.

The following figures and interfaces are for reference only, and the actual product shall prevail.
Initializing Device 2.1
Double-click "ConfigTool.exe" to open the tool. Step 1
Click . Step 2
The
Modify IP
interface is displayed. See Figure 2-1.
Modify IP Figure 2-1
Click Search setting . Step 3
The
Setting
interface is displayed.
Enter the start IP address and end IP address of the network segment in which you want to Step 4
search devices, and then click OK .
All the devices found in the network segment are listed.
Select one or several devices whose Status is Uninitialized , and then click Initialize . Step 5
The
Device initialization
interface is displayed.