background image

Important Safeguards and Warnings 

Please read the following safeguards and warnings carefully before using the product in 

order to avoid damages losses and body injuries. After reading, please well keep this user's 

manual.   

Note: 

 

Please change user default password after being armed.   

 

Do not install the device at position exposed to sunlight or in high temperature. 

Temperature rise in device may cause fire. 

 

Do not expose the device to lampblack, steam or dust. Otherwise it may cause 

fire or electric shock.   

 

The device must be installed on solid and flat surface in order to guarantee safety 

under load and earthquake. Otherwise, it may cause device to fall off or turnover. 

 

Do not drop or splash liquids onto the device, and do not place container with full 

liquid on the device to prevent liquid spilling from entering the device. 

 

Do not block air vent of the device or ventilation around the device. Otherwise, 

temperature in device will rise and may cause fire. 

 

Use the device only within rated input and output range.   

 

Do not disassemble the device without professional instruction. 

 

Please transport, use and store the product under appropriate temperature and 

humidity. 

 

Warning: 

 

Please use battery properly to avoid fire, explosion and other dangers.   

 

Please replace used battery with battery of the same type.   

 

Do not use power line other than the one specified. Please use it properly within 

rated range. Otherwise, it may cause fire or electric shock.   

 

Please use power supply matching SELV requirements, and IEC60950-1 Limited 

Power Source. Power supply shall follow requirements on device label.   

 

For I-type structure product, connect it to power supply plug with GND protection.   

 

If you use power plug or appliance coupler as disconnecting device, please 

maintain the disconnecting device available to be operated all the time.   

 

Privacy Protection Notice 

As the device user or data controller, you might collect personal data of others' 

such as face, fingerprints, car plate number, Email address, phone number, 

GPS and so on. You need to be in compliance with the local privacy protection 

laws and regulations to protect the legitimate rights and interests of other people 

by implementing measures include but not limited to: providing clear and visible 

identification to inform data subject the existence of surveillance area and 

providing related contact. 

Содержание ASC1204B-S

















Отзывы: