Dahua ASC1202C-D Скачать руководство пользователя

Страница: 37 / 38

FAQ 27

FAQ

For problems not included hereinafter, please contact local customer service personnel or

consult headquarter customer service personnel. We will be always at your service.

1. Question: After power on, power indicator doesn’t turn on or the buzzer doesn’t

respond.

Answer: Please check whether power plug is inserted in place. Please pull it out and insert it

again.

2. Question: After the reader is connected with the device, card swiping light doesn’t

turn on, and it doesn’t respond after swiping a card.

Answer: Please check whether reader connector is inserted in place. Please pull it out and

insert it again; check whether reader contact light turns on.

3. Question: Client software fails to detect the device.

Answer: Please check whether TCP/IP connector is connected properly, and whether device IP

is in the same network segment.

4. Question: After swiping card, it prompts that card is invalid.

Answer: Please check whether this card number has been added in the controller.

5. Question: Default IP of access controller.

Answer: Default IP address is 192.168.0.2.

6. Question: Default port, initial user name and password of access controller.

Answer: Default port is 37777, initial user name is admin and password is 123456.

7. Question: Online upgrade of the device.

Answer: Connect the device and platform through network, and upgrade it at the platform.

8. Question: Max. wiring distance and transmission distance of card reader and

controller.

Answer: It depends on network cable type and whether it needs power supply of control relay.

Connected with CAT5E network cable, typical value is:



RS485, 100m.



Wiegand, 100m.

Содержание ASC1202C-D







































Результаты поиска

Содержание ASC1202C-D

Отзывы:

Похожие инструкции для ASC1202C-D

Бренды по названию

Популярные бренды

Dahua ASC1202C-D, Руководство пользователя

Результаты поиска

Содержание ASC1202C-D

Отзывы:

Похожие инструкции для ASC1202C-D

Бренды по названию

Популярные бренды