34
Figure 5-5
Event Control
Sheet 5-6
Event Control - Parameter Explanation
Parameter
Explanation
EventSelector
Event setting.
Selects the type of event, including
:
ExposureEnd
(
Exposure end event
)
FrameTrigger
(
Event for frame trigger sending signal to
sensor
)
FrameStart
(
Receiving frame trigger event
)
AcquisitionTrigger
(
Acquisition trigger event
)
AcquisitionStart
(
Acquisition start event
)
EventNotification
Sets whether to notify the upper layer software after selecting the
event type. ON is for notifying, OFF for not notifying.
5.6
AnalogControl
In this property, you can adjust the acquired analog signals, including gain , black balance, white
balance and gamma correction etc., as shown in Figure 5-6; please refer to Sheet 5-7 for detailed
parameter settings.
Figure 5-6
Analog Control
Sheet 5-7
Analog Control - Parameter Explanation
Parameter
Explanation
GainSelector
The channel gain is not supported to set, the default is All.
GainRaw
The larger the gain, the brighter the image. The set range is different for