13
10. Connect the safety tether to the dome and to the hook on the mount adapter.
Figure 4-4
11. Connect the incoming cables routed through the wall mount to the corresponding power, Ethernet,
audio, and alarm cables from the dome composite cable.
Installing the Camera
Figure 4-5
1. Pull the connected cables into the wall mount bracket with care.
2. Align the straight edge of the flange on the dome with the straight edge of the mount adapter
quick installation port. Slowly push the dome into the mount adapter quick installation port.
3. Secure the M6 x 14 stainless screw with a spring washer, located at the front of the mount
a
dapter, to the Φ6.5 mm hole on the dome flange with the hex tool.
4. Secure the other two M6 x 14 stainless screws to the dome flange.
5. Ensure the safety tether is attached to camera pedestal and to the dome cover.
