background image

 

  II 

About the Guide 

 

This user guide has been compiled with great care and the information it contains has 
been thoroughly reviewed and verified. 

 

The text was complete and correct at the time of printing. This guide may be periodically 
updated to reflect changes to the product or to correct previous information and the 
content of this guide can change without notice. 

 

If you encounter an error or have any questions regarding the contents of this guide, 
contact customer service for the latest documentation and supplementary information. 

 

Dahua accepts no liability for damage resulting directly or indirectly from faults, 
incompleteness, or discrepancies between this guide and the product described. Dahua is 
not liable for any loss caused by installation, operation, or maintenance inconsistent with 
the information in this guide. 

 

All the designs and software are subject to change without prior written notice. The 
product updates may cause some differences between the actual product and the Guide. 
Please contact the customer service for the latest program and supplementary 
documentation. 

 

Video loss is inherent to all digital surveillance and recording devices; therefore Dahua 
cannot be held liable for any damage that results from missing video information. To 
minimize the occurrence of lost digital information, Dahua recommends multiple, 
redundant recording systems, and adoption of backup procedure for all data. 

 

All trademarks, registered trademarks and the company names in the Guide are the 
properties of their respective owners. 

 

Please visit our website, contact the supplier or customer service if there is any problem 
occurred when using the device. 

 

Contact the supplier or customer service if you encounter any issue while using this unit.   

Содержание 59232XANR





























Отзывы: