10
To support group call, tick “Enable”. After enabling group call, the device will reboot
and put it into effect.
Platform (VTSS5000) works as SIP server
Select “Server Type” to be “VTSS5000”, and click “OK” to save configurations.
To set “Building No.” and “Building Unit No.”, please turn on “Support
Building” and “Support Unit” functions.
To “Support Group Call”, please turn on “Support Group Call” function.
The device will reboot and put it into effect.
3.1.1.4 SIP Server Config
Configure SIP server info.
Select “System Config> Network Config> SIP Server Config”. The system displays “SIP Server
Config” interface, as shown in Figure 3-7.
Figure 3-7
This VTO works as SIP server
Tick “Sip Server Enable” and click “OK” to save the configuration. VTO reboots
automatically, and WEB interface jumps to login interface.
Other VTO or platform works as SIP server
Configure the parameters and refer to Table 3-1
for details. Click “OK” to save the
configuration. VTO reboots automatically, and WEB interface jumps to login interface.
Parameter
Description
IP Address
When VTO works as SIP server, this is IP address of
the VTO.
When the platform works as SIP server, this is IP
address of the platform.
Port
When VTO works as SIP server, default value is 5060.
When the platform works as SIP server, port is 5080.
Username
Use the default values.
Password