9
4.3 Adjusting the Camera View Angle
1.
Loosen, but do not remove the set screws on either side of the bracket that holds the camera.
2.
Rotate the camera module to adjust the horizontal Lens rotation angle. (0° to +355°).
3.
Use the Torx wrench to press the button on the side of the camera module to unlock the vertical
lens rotation control and the horizontal image control.
4.
Manually tilt the lens or up or down to adjust the tilt angle (0° to +85°).
5.
Manually rotate the lens module (0° to +355°) to set the horizontal image angle.
6.
Place the dome enclosure over the camera body and route the cables if necessary. Secure the
dome enclosure to the dome body with the three Torx screws.
